What makes a Thorough Examination truly "Thorough"?
18 November 2026
What makes a Thorough Examination truly "Thorough"?
There is no one size-fits-all approach to inspecting workplace equipment for safe use. From forklift masts and hydraulics to tractor steering systems, each component must be examined before it can receive the trusted CFTS stamp of approval, certifying that it has passed a “Thorough Examination”.
Examination requirements are based on LOLER (Lifting Operations and Lifting Equipment Regulations 1998) and PUWER (Provision and Use of Work Equipment Regulations 1998). In many cases, the frequency or nature of the examination may change due to scheduling requirements or exceptional circumstances.
Whatever the case, a Thorough Examination is about a lot more than just an annual tick-box inspection.
LOLER and PUWER: the what and the why
“LOLER compliant” equipment is a familiar phrase, suggesting it is safe and legal to use. However, LOLER only tells half the story.
UK law makes two distinct demands: under LOLER, lifting equipment must undergo a Thorough Examination; under PUWER, a safety inspection is required to ensure the equipment as a complete asset is safe to operate.
Take a counterbalance forklift, for example. PUWER covers key operational components of the truck such as brakes, steering, tyres, and the chassis and cabin. Regulation 5(1) says: “Every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair.”
In practice, that means a forklift must not only be able to lift a load but also brake when it should, steer accurately, and protect the driver.
CFTS-accredited members perform what the industry calls a "Thorough Examination" to cover both LOLER and PUWER requirements in a single, complete service. Too many inspection providers sell themselves as the complete package while only covering LOLER requirements, overlooking PUWER or delegating it elsewhere. But without PUWER, there's no guarantee your equipment is safe — or legal — to use.
A CFTS Thorough Examination is a guarantee that all relevant parts of equipment have been checked as required for total peace of mind.
Importance of inspection schedules
Many employers and operators are aware that their equipment requires routine Thorough Examinations annually. However, there are exceptional circumstances which require more frequent inspections. For example, if an incident occurs where equipment integrity is compromised because of damage, impact or overloading, then an additional inspection is required to stay compliant.
Additionally, if equipment has been modified or is out of use for a substantial period, it’ll likely need an extra inspection to keep you covered.
Ultimately, it’s the responsibility of the duty holder to ensure equipment is safe to use on site and has received its required inspections. So, while CFTS provide the recognised industry standard for Thorough Examinations, it is on the equipment owner to ensure these inspections are carried out on time.
What does a Thorough Examination mean for you?
HSE fines for materials handling infringements average £145,000 in the UK. And this may not even be the biggest risk faced by those who dismiss or delay inspections.
79% of UK workers say that they would consider leaving a position due to unsafe workplace conditions. More alarming yet are the costs related to staff turnover. Replacing a mid-level employee can cost upwards of £30,000, often costing around 75% of the previous employee's salary.
Too many companies prioritise profit margins over the proactive protection of employees from unsafe equipment. And yet, the cost of non-compliance — should an incident occur — can be ruinous both financially and reputationally.
When people aren't confident in the safety of their equipment or the protective vigilance of their employer, they're less likely to stick around for any meaningful period, also resulting in costly employee attrition.
And these dangers caused by a missed inspection are not theoretical. A steering fault can send a truck careering into a busy aisle. Worn tyres can fail to grip on wet yard surfaces. A missing seatbelt can turn a near miss into a fatality in the event of a tip-over.
Compliance is never the result of a one-off inspection, and a truly Thorough Examination saves lives and businesses.
What is CFTS doing to help?
The introduction of the CFTS Thorough Examination App is helping make life easier for its 800+ members to simplify inspections and ensure compliance.
Key features:
-
Generate and send automated customer compliance reports
-
Identify and proactively chase expiring customer certificates
-
Manage inspection schedules, customer details, and equipment requirements all in one place
-
Access preloaded checklists to ensure every inspection is accurate
-
Plus, its latest update makes it even simpler to carry out a truly Thorough Examination by enabling members to:
-
Backdate reports if they weren’t completed on the day
-
Add company logo and details to reports and certificates
-
Access new product specific worksheets for different equipment types
-
Use checklists to add multiple equipment items to a single report
-
Search individual items in detail using improved search functions
CFTS was created to remove doubt by setting a clear, industry-wide standard that covers both LOLER and PUWER. Accredited members are trained to a defined procedure, audited for consistency, and supported with ongoing technical guidance.
Together, we can create safer working environments where hazardous incidents and costly downtime are a rarity. Now you know what makes a Thorough Examination truly thorough, you know exactly what to look for in an inspection provider. Or, simpler yet, you can use one of the 800+ CFTS members in the UK to remove all doubt.
If you have any questions, your local CFTS member will be happy to help. To find them, use our postcode search.
